There is something Zen about spending an hour or two each week pushing the mower around the yard on a sunny day. The drone of the motor drowns out your thoughts as you work on a task with a clearly defined objective: Making your lawn look its best. Of course the deciding factor between an almost meditative experience and one filled with frustration is often the quality of the lawn mower you have.
To sharpen them secure in a table vise. Now attach the blade sharpener to the end of your power drill. Make sure to wear eye protection and work gloves. Carefully use the sharpener to hone the cutting edges of your blades. Go slowly at first to get the feel of the best angle for meeting the blade and sharpener.
After sharpening both sides of the blade place it on the kits cone-shaped balancer. If one side dips below the other continue sharpening it until the blade rests level. Return the sharpened blades to the mower and reattach. If you have a torque wrench its a good idea to use it here. Often you need to tighten the blade mounting bolt/bolts to a specific tightness level. Typically measured in pound-feet your instruction manual should list these specs. For example my personal machine the Honda HRR216VKA between 36 to 43 lb-ft of torque is required.