Gather what you need First gather your tools and equipment. You will need a power drill eye protection work gloves and a blade sharpening kit. The kit should come with a ceramic blade sharpener and balancer. Expect to pay about $8 for the kit at your local hardware store. You will also need a torque wrench (or a socket wrench in a pinch) and a wooden block. Consider having a rubber mallet on hand too.
Get out there and mow Now that you have done all that your mower should be ready to tackle the season in stride. It should run smoother and more safely too. Even better you have just saved the $200 to $300 fee it typically costs at least in my neck of the woods to have your lawn mower serviced professionally. So go on and get out there. That high grass needs cutting.
With the mower still on its side grab your socket wrench and wood block. Place the block inside the blade well. This is to prevent the blades from turning while you loosen their bolts. Remove the blade mounting bolt/bolts. A typical mower will have one blade like the Craftsman 37700 I serviced for this guide (one mounting bolt). Some like my Honda HRR216VKA have two blades an upper and a lower (two mounting bolts). Each blade should have at least two cutting edges.