After sharpening both sides of the blade place it on the kits cone-shaped balancer. If one side dips below the other continue sharpening it until the blade rests level. Return the sharpened blades to the mower and reattach. If you have a torque wrench its a good idea to use it here. Often you need to tighten the blade mounting bolt/bolts to a specific tightness level. Typically measured in pound-feet your instruction manual should list these specs. For example my personal machine the Honda HRR216VKA between 36 to 43 lb-ft of torque is required.
I know that many people prefer to hose their mowers down with a garden hose. I admit I have done it. Still doing that is risky. If water gets into the wiring air filter or engine you could really do some damage. Hand washing with damp rag is a drag but also your safest bet.
Other items and supplies include a plastic drip tray motor oil and a container for waste oil. Often a large piece of cardboard is useful as well an old rag or cloth. Also know that this guide deals with push or self-propelled mowers not riding mowers. While some advice here applies they are another animal altogether.