To sharpen them secure in a table vise. Now attach the blade sharpener to the end of your power drill. Make sure to wear eye protection and work gloves. Carefully use the sharpener to hone the cutting edges of your blades. Go slowly at first to get the feel of the best angle for meeting the blade and sharpener.
Next you will change the oil. To lower oil viscosity and get it moving freely run the engine for a few minutes. Now shut the engine off and roll the mower onto a piece of cardboard or drop cloth. Close the fuel line (if your mower has one) and unhook the spark plug as before. Find the oil filler tube and remove its cap. Often the cap also functions as a dipstick.
To clean it first start with a cool engine. If your mower has a fuel valve switch it off. If you can disconnect the spark plug too. Next use a leaf blower to blast away any old dirt and major debris. Now gently lay the mower on its side fuel cap facing up. Try to get rid of any junk on the mowers underside as well.