Your Best Digs also recommends the Sun Joe mower but the reviewer also added a number of caveats. He found it will get the job done if you prefer to only bag and just have $100 to spend. However the clippings compartment filled up quickly for him. And the height adjuster felt flimsy and required adjustments on each wheel.
With the mower still on its side grab your socket wrench and wood block. Place the block inside the blade well. This is to prevent the blades from turning while you loosen their bolts. Remove the blade mounting bolt/bolts. A typical mower will have one blade like the Craftsman 37700 I serviced for this guide (one mounting bolt). Some like my Honda HRR216VKA have two blades an upper and a lower (two mounting bolts). Each blade should have at least two cutting edges.
Gather what you need First gather your tools and equipment. You will need a power drill eye protection work gloves and a blade sharpening kit. The kit should come with a ceramic blade sharpener and balancer. Expect to pay about $8 for the kit at your local hardware store. You will also need a torque wrench (or a socket wrench in a pinch) and a wooden block. Consider having a rubber mallet on hand too.