For the past three years we have used the Greenworks 22502 Corded Lawn Mower on our ¼-acre lawn. We particularly like how easy it is to adjust the blade height and it is surprisingly light. There are just a couple negatives we have noticed. We live in the Pacific Northwest where mowing wet grass is unavoidable. When the grass is wet it does not feed into the bag of this mower easily. Also we had to replace the cord after my teenager ran over it with the mower. So cord control is important and takes a little planning.
Some lawn mowers such as the Craftsman 37705 have a washout feature. It is essentially a garden hose fitting on top of the circular blade cover. This allows you to pump water into the blade assembly while running the engine. That action is designed to flush dirt and grass debris right out.
After sharpening both sides of the blade place it on the kits cone-shaped balancer. If one side dips below the other continue sharpening it until the blade rests level. Return the sharpened blades to the mower and reattach. If you have a torque wrench its a good idea to use it here. Often you need to tighten the blade mounting bolt/bolts to a specific tightness level. Typically measured in pound-feet your instruction manual should list these specs. For example my personal machine the Honda HRR216VKA between 36 to 43 lb-ft of torque is required.