Place a drip pan or other container on the side of the mower with the filler. Carefully tilt the mower so oil drains out and into the pan. Discard the spent oil into a proper disposal vessel. Now slowly pour fresh oil into the mower. For the specific type of oil you need check your instruction manual. Make sure to add only as much as your particular model requires. Remember to let the mower sit undisturbed for a few minutes so the oil settles properly inside the engine.
The EGO 21-inch handles side discharge bagging and mulching. It is designed for use in all weather and even features LED headlights for when mowing in heavily-shaded areas or after dark. There are six deck heights to pick from and adjustments are made with a single lever. EGO backs the quality of their mowers with a five-year limited warranty.
With the mower still on its side grab your socket wrench and wood block. Place the block inside the blade well. This is to prevent the blades from turning while you loosen their bolts. Remove the blade mounting bolt/bolts. A typical mower will have one blade like the Craftsman 37700 I serviced for this guide (one mounting bolt). Some like my Honda HRR216VKA have two blades an upper and a lower (two mounting bolts). Each blade should have at least two cutting edges.