After sharpening both sides of the blade place it on the kits cone-shaped balancer. If one side dips below the other continue sharpening it until the blade rests level. Return the sharpened blades to the mower and reattach. If you have a torque wrench its a good idea to use it here. Often you need to tighten the blade mounting bolt/bolts to a specific tightness level. Typically measured in pound-feet your instruction manual should list these specs. For example my personal machine the Honda HRR216VKA between 36 to 43 lb-ft of torque is required.
With the mower still on its side grab your socket wrench and wood block. Place the block inside the blade well. This is to prevent the blades from turning while you loosen their bolts. Remove the blade mounting bolt/bolts. A typical mower will have one blade like the Craftsman 37700 I serviced for this guide (one mounting bolt). Some like my Honda HRR216VKA have two blades an upper and a lower (two mounting bolts). Each blade should have at least two cutting edges.
The EGO LM2101 is the highest-rated electric-battery mower on Consumer Reports by far. Its lowest category rating is for its bagging for which it is rated “good.” Despite testing the push option the reviewer found this mower was easy to operate and had effortless handling. However they found the 40-minute battery runtime to be fairly short a common issue with cordless electric mowers. Techaeris tested the EGO LM2102SP and found the battery lasted 60 minutes which was long enough to finish the reviewers 1/3-acre lawn. He estimated that the yearly cost to operate the EGO would be $1.50.