The Greenworks 20-inch 12 Amp Corded Lawn Mower has a lot of features that can make your mowing experience enjoyable. Since it is corded you dont need to stop to recharge a battery or gas up. It is a three-in-one that has mulching side discharge and rear bagging capabilities. There are seven cutting height positions ranging from 1.5 to 3.75 inches and you can adjust the height with a single lever. Plus the 10-inch rear wheels 7-inch front wheels and 56-pound size make it easy to push around the yard.
Gather what you need First gather your tools and equipment. You will need a power drill eye protection work gloves and a blade sharpening kit. The kit should come with a ceramic blade sharpener and balancer. Expect to pay about $8 for the kit at your local hardware store. You will also need a torque wrench (or a socket wrench in a pinch) and a wooden block. Consider having a rubber mallet on hand too.
With the mower still on its side grab your socket wrench and wood block. Place the block inside the blade well. This is to prevent the blades from turning while you loosen their bolts. Remove the blade mounting bolt/bolts. A typical mower will have one blade like the Craftsman 37700 I serviced for this guide (one mounting bolt). Some like my Honda HRR216VKA have two blades an upper and a lower (two mounting bolts). Each blade should have at least two cutting edges.