After sharpening both sides of the blade place it on the kits cone-shaped balancer. If one side dips below the other continue sharpening it until the blade rests level. Return the sharpened blades to the mower and reattach. If you have a torque wrench its a good idea to use it here. Often you need to tighten the blade mounting bolt/bolts to a specific tightness level. Typically measured in pound-feet your instruction manual should list these specs. For example my personal machine the Honda HRR216VKA between 36 to 43 lb-ft of torque is required.
Gather what you need First gather your tools and equipment. You will need a power drill eye protection work gloves and a blade sharpening kit. The kit should come with a ceramic blade sharpener and balancer. Expect to pay about $8 for the kit at your local hardware store. You will also need a torque wrench (or a socket wrench in a pinch) and a wooden block. Consider having a rubber mallet on hand too.
Before we get into the nuts and bolts of the Honda 21-inch Variable Speed 4-in-1 Gas Walk Behind Self Propelled Lawn Mower we should point out that the model numbers HRX217VKA and HRX217K5VKA are used interchangeably by Honda to refer to this lawn mower and there do not appear to be any differences between the two. That said the best adjective to describe the HRX217VKA is powerful.